New cylinder head for V1505 Turbocharged engine. Supplied bare.


Valves and springs are also available in the V1505T section . 



Tech Tip 


The valve springs do weaken after a severe overheat and due to the fact you are replacing the cylinder head as it is probably cracked as a result of overheating consideration should be given to checking the springs - when the springs are removed simply line them up in a row and look at the heights and it will be obvious any defective springs will stand out . A good spring length should be in the region of 37mm and the poundage should be 25LB @ 31mm 

For a Kubota V1505T Engine

SKU: 9/16285T