We offer comprehensive range of Kubota conrods remanufactured to exacting standards in our own workshop..
Each conrod is checked for bend and twist.  

A non destructive crack-test (NDT) is carried out.

 Each conrod and cap are lightly ground on the joint faces. 

The cap is assembled to the conrod and the bolts torqued 
Each conrod bore is precision honed to the makers specification, and roundness is
     maintained to within 0.0001mm (one tenth of a thou)

The small end bush is inspected and replaced if required.
Supplied on outright basis - no exchange required

CONNECTING RODS